How to maintain a mechanical shearing machine
Release Time: 1/16/2026 5:43:20 PMBy SENCO
Maintenance methods for shearing machines:
1. Operate strictly in accordance with the operating procedures.
2. Before each start-up, add lubricating oil at the required time, location and quantity according to the lubrication chart. The oil should be clean and free of sediment.
3. The machine must be kept clean frequently. Anti-rust oil should be applied to the unpainted parts.
4. The lubricating oil in the motor bearings should be replaced and added regularly, and the electrical components should be checked for normal operation, safety and reliability.
5. Regularly check the triangular belts, handles, knobs, and buttons for damage. Severely worn ones should be replaced promptly and spare parts should be replenished.
6. Regularly inspect and repair switches, fuses, handles, and ensure their reliable operation.
7. 10 minutes before the end of each workday, lubricate and clean the machine. Wipe it clean.
8. Non-designated personnel are strictly prohibited from operating this equipment. It must be ensured that the machine is stopped when no one is working.
1. Operate strictly in accordance with the operating procedures.
2. Before each start-up, add lubricating oil at the required time, location and quantity according to the lubrication chart. The oil should be clean and free of sediment.
3. The machine must be kept clean frequently. Anti-rust oil should be applied to the unpainted parts.
4. The lubricating oil in the motor bearings should be replaced and added regularly, and the electrical components should be checked for normal operation, safety and reliability.
5. Regularly check the triangular belts, handles, knobs, and buttons for damage. Severely worn ones should be replaced promptly and spare parts should be replenished.
6. Regularly inspect and repair switches, fuses, handles, and ensure their reliable operation.
7. 10 minutes before the end of each workday, lubricate and clean the machine. Wipe it clean.
8. Non-designated personnel are strictly prohibited from operating this equipment. It must be ensured that the machine is stopped when no one is working.
